Here is an example of a common residential job we do. The homeowner has an image that they wanted painted in the living room. The image is 5 FT wide x 4 FT tall and that ended up being $22 per square foot. Final invoice: $440. There was very minor touchup that the image needed. It was a great quality quote to begin with. Most jobs are in the $20 - $30 a square foot range. Feel free to email us a photo if you have one you want printed. We would be happy to let you know how big you can go with it at no charge.
Reach out to us any way you prefer. Call or text us at 352-476-2901. Email us at floridawallgraphics@yahoo.com. These will be the fastest replies. Within 24 hours. You can also reach out via any one of our social media platforms which all have links on our site.
We service the entire Atlanta Metro including the following counties: Barrow, Butts, Carroll, Clayton, Coweta, Dawson, Dekalb, Douglas, Fayette, Forsyth, Fulton, Gwinnett, Hall, Henry, Jasper, Lumpkin, Meriwether, Morgan, Newton, Pickens, Pike, Rockdale, Spalding, and Walton counties. We will drive to you. If you are truly too far, we will reach out to our national partners that might be closer to you.
It takes 10 - 30 minutes to assemble our wall printer. About the same to break it down and out it back in the vehicle.
Indoor life expectancy can easily be 15 years without fading. Outdoor holds up for 5 years without fading. A form of clear coat is recommended on top of the print which we apply. These inks have been tested by spraying the print with common products such as: bleach spray (similar to Clorox cleaner with bleach), Isopropyl Alcohol, antibacterial wipes (similar to Lysol) and even industrial cleaners meant to clean surfaces and disinfect. In the test, one would literally spray the print with the products above, wipe it down, and then run their hand across it. Just like cleaning a pane of glass. The print stands up with smearing, running, or fading. They ran their hand over the print and no color appears on their hand.
The printer can move very quickly, printing around 20-50 square feet every hour. It all depends on the actual image we are printing.
Our print inks have an amazing 3D effect and can print gold, silver and even jade carvings!
The printer can move very quickly, printing across 20-50 square feet every hour. It all depends on the actual image we are printing.
We offer the world’s leading ultrasonic sensor for wall preview, up to 11cm head justification for wall irregularities. No need for very flat walls, our wall printers print high quality pictures on uneven surfaces.
In our world, the revolution can never be too good! Many folks provide us with 720*1440dpi. Don't let this concern you. Send us what you have and we will take care of the rest. We have incredibly talented graphic designers on staff. They do this all day.
Height: On its own, our machine can print up to 12 feet. If your design requires taller than 12 feet, no worries! We set up scaffolding and continue printing. This technique is called "stitching".
Width: There is no limit. Our vertical printer drives from left to right and can continue driving the entire length of your wall. It's a lot of fun to see in action!
The ink of the machine is custom-made in the USA. It is a proprietary recipe which makes this ink very suitable for the printing process of our machine. Our low VOC and eco-safe ink plays a large role in making our prints look so good. It is also a tough ink that can print outside.
Our printer uses a unique and proprietary type of ink that’s both eco-friendly and incredibly tough. It resists scratching and fading due to sun exposure over time. Because the highly pigmented ink also cures almost immediately.
All of our machines are equipped with sensors that automatically sense the flatness of the wall. So our machine can print high quality murals on slightly curved walls.